fbpx

Полиамид для 3D-печати

  • PA-11

    Technical parameters
    Category Powder for SLS printing
    Material type Nylon 11
    Packaging Plastic bottle
    Granulation 20 – 80 [μm]
    Colour Navy Grey
    Elongation at Break 40 [%]
    Tensile Strength 54 [MPa]
    Shore hardness in scale D 76
    Material refreshing ratio 50 [%] – to reuse leftover PA11 powder add 50% of FRESH powder.
  • PA-12

    Technical parameters
    Category Powder for SLS printing
    Material type Polyamide 12 powder
    Packaging Plastic bottle
    Granulation 18 - 90 [μm]
    Colour Navy Grey / Anthracite
    Elongation at Break 13 %
    Tensile Strength 41 [MPa] | 5.9 [ksi]
    Softening point (Vicat method type A50 / B50) 172 / 155 [°C] | 342 / 311 [°F]
    Heat deflection temperature B 0.45 [MPa] 143 [°C] | 289 [°F]
    Shore hardnes in scale D 74
    Melting point 182°C
    Elastic / Young’s modulus E 1029 [MPa] | 148 [ksi]
    Material refreshing ratio 30 [%] – to reuse leftover PA12 powder add 30% of FRESH powder.

     

другие материалы...

Вы можете купить Полиамид в нашем магазине

Широкий выбор производителей. Всегда в наличии!

Купить сейчас

или заказать 3D-печать